SOPRASEAL STICK FLASH PRO Air & Vapor Barrier Flashing Membrane - 4" x 75’
SOPRASEAL STICK FLASHPRO a 17mil, self-adhesive, air and vapor barrier flashing membrane composed of a polymer-based adhesive and a tough, tri-laminated woven polyethylene facer. It is used as a water-resistive rough opening flashing membrane for windows and transitions prior to the installation of any of SOPREMA’s continuous air and vapor barriers used in wall assemblies.
FEATURES & BENEFITS
- Adhesion to all common wall construction without the use of a primer.
- Highly compatible with typical glazing sealants
- Asphalt free & no odor
- Available in 5 widths to fit any opening.
- Can be applied in temperatures as low as 5°F (-15°C).
- Can be exposed to UV for up to 6 months during construction
INSTALLATION
SUBSTRATE PREP – Substrates should be clean, sound, dry and free of loose materials, grease, and any contaminants that may compromise the adhesive performance of the product.
PRIMING – Primer is typically not required on most surfaces however, if needed, ELASTOCOL® STICK brand primer may be used and individual project field adhesion testing may be desirable.
INSTALLATION – Align membrane and remove silicone release paper. All membrane overlaps must be a minimum of 2 inches. Once installed, apply pressure over the entire surface with a weighted hand roller to ensure intimate contact of adhesive with the substrate. Please refer to SOPREMA detail drawings on our website for sequencing of the application.